TELTONIKA Industrial Managed PoE+ Switch (TSW202)

Features:

TSW202 is the first-ever Teltonika Networks managed PoE+ switch, designed to provide granular network management capabilities while centralizing power distribution. This PoE+ switch enables flexibility over solution management and power supply and enhances M2M communication by supporting a wide range of industrial protocols, including EtherNet/IP, Profinet, and MRP. The TSW202 has 2 high-performance SFP ports for long-range fibre optic communication and 8 Gigabit Ethernet ports providing 30 W of power each.

MANAGED SWITCH
L2 with additional L3 features for enhanced management and control

PoE+ & SFP
8 x port PoE+ switch with 2 x SFP ports for fibre optic communication 

PROFINET & MORE
Supports Profinet for automated data processing alongside other protocols, like EtherNet/IP and MRP

TSWOS
eltonika Networks OS for switches, intuitively designed for infinite configurations

Specification:

Ethernet
ETH: Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover
Fibre: 2 x SFP ports
IEEE 802.3 series standards: IEEE 802.1p, IEEE 802.1Q, 802.3az

PoE Out
PoE ports: Port 1 - 8
PoE standards: 802.3af and 802.3at
PoE Max Power per Port (at PSE): 30 W
Total PoE Power Budget (at PSE): 240 W
Maximum Ethernet cable length: 100 m

Services
EtherNet/IP: Yes
Profinet (class B): Yes
SNMP V2, V3: Yes
LLDP: Yes

Network
MRP: MRP client role, MRP manager role
L2 features: Loop protection, Forwarding table, VLAN, STP/RSTP
DHCP: DHCP server, DHCP client
Port Settings: Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring
L3 Features: Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address

QoS
QOS: Port priority, DSCP priority, 802.1p priority, TOS
Scheduling method: SP/WFQ/WRR
Bandwidth control: Rate limiting, storm control
Traffic Shaper: Port-based shaping

Diagnostics
Tools: Cable diagnostic, ping, traceroute, nslookup

System Characteristics
RAM: 128MB, DDR3
FLASH storage: 16 MB serial flash

Firmware / Configuration
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA: Update FW
RMS: Update FW/configuration for multiple devices at once
Keep settings: Update FW without losing current configuration

Firmware customisation
Operating system: TSWOS (OpenWrt based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided

Performance Specifications
Bandwidth (Non-blocking): 20 Gbps
Packet buffer: 512 KB
MAC address table size: 8K entries
Jumbo frame support: 10000 bytes

Power
Connector: 2-pin industrial DC power socket
Input voltage range: 7 – 57 VDC
PoE-out input voltage range: 44 – 57 VDC
Power consumption: Idle: < 3 W / Max: 8 W / PoE Max: 248 W

Physical Interfaces
Ethernet: 8 x RJ45 ports, 10/100/1000 Mbps
Fibre: 2 x SFP ports
Status LEDs: 1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs
Power: 1 x 2-pin industrial DC power socket
Reset: Software reset button
Other: 1 x Grounding screw

Physical Specification
Casing material: Anodized aluminum housing and panels
Dimensions (W x H x D): 132 x 44.2 x 122.2 mm
Weight: 610 g
Mounting options: Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement

Operating Environment
Operating temperature: -40 °C to 75 °C
Operating humidity: 10% to 90% non-condensing
Ingress Protection Rating: IP30

Regulatory & Type Approvals
Regulatory: CE, UKCA, RCM, ANRT, FCC, IC, CB, RoHS, REACH

EMC Emissions & Immunity
Standards:
   EN 55032:2015 + A11:2020 + A1:2020
   EN 55035:2017 + A11:2020
   EN IEC 61000-3-2: 2019 + A1:2021
   EN 61000-3-3: 2013 + A1:2019 + A2:2021
ESD: EN 61000-4-2:2009
Radiated Immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge Immunity (AC Mains Power Port): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2020

Safety
Standards:
   CE: EN IEC 62368-1:2020 + A11:2020
   RCM: AS/NZS 62368.1:2022
   CB: IEC 62368-1:2018