UBIQUITI airMAX® CPE Installation Tool (U-Installer)
The U-Installer is a useful tool to make airMAX CPE installation easier. It provides Wi-Fi connectivity and 24V PoE power to a CPE, so you can use the intuitive UMobile app on a smartphone or tablet for alignment and configuration. Internal Battery Pack
|Price exc. VAT:||Price inc. VAT:||For orders (total sum):|
The durable Ubiquiti® Installer should be in every WISP installer’s toolbox. The U -Installer makes installing airMAX® Customer Premise Equipment (CPE) devices easier and more efficient. Position, provision, and configure the CPE device at the point of installation using a tablet or smartphone.
Mobile Device-Friendly Installation
The U-Installer provides Wi-Fi connectivity to the CPE management interface during installation, so provisioning and final adjustments can be made with a tablet or smartphone.
The U-Installer also provides 24V PoE to the CPE, making installation easier. The Wi-Fi functionality allows the U-Installer to be used with devices that don’t support 24V PoE.
Accessing airOS via Wi-Fi
The U-Installer gives you the ability to configure your CPE device through its Wi-Fi management radio and the U Mobile app. Broadcasting its own SSID, the U-Installer allows mobile devices to connect wirelessly to the same network as your CPE device. This simplifies both device discovery and configuration. The U Mobile app provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android). U Mobile allows you to set up, configure, and manage your CPE devices.
The U-Installer’s hardware features make configuring and provisioning your CPE fast and efficient.
Powers CPE via PoE. The U-Installer’s PoE out port conveniently supplies 24V passive PoE to the CPE device.
Durable Rubber Casing. The removable rubber casing protects the U-Installer during installation.
External PoE Reset. Quickly reset the device connected to the U-Installer to factory defaults.
Rubber Case Clip. Use the clip on the back of the rubber casing to secure the U-Installer to a belt or pocket.
24V PoE and 1000mAh Internal Battery Pack
The U-Installer provides 24V PoE power to the airMAX CPE. With its internal battery pack, the U-Installer simplifies your installation toolkit.
Use the intuitive UMobile app for iOS or Android to align and configure the airMAX CPE or other Ubiquiti device.
The U-Installer provides Wi-Fi connectivity to the airOS management interface of a Ubiquiti device for a tablet or smartphone.
CPE Installation Simplified
Dimensions: 93 x 57 x 38.2 mm (3.66 x 2.24 x 1.50")
Processor: Atheros MIPS 74KC, 560MHz
Memory: 64 MB DDR2
(1) Reset U-Installer
(1) Reset External airMAX Device
(1) Power On/Off
(1) 10/100 Ethernet Port
Ports: (1) USB-C Port
Passive PoE Output:
Voltage - 24V
Max. Power - 12W
Management Interface: Wi-Fi
Wi-Fi Frequency: 2.4 GHz
Wi-Fi Standards: 802.11b/g/n
Power Method: Internal Battery
USB Mobile Battery Pack: 5V, 3A (Not Included)
Power Supply: 5V, 3A
Supported Voltage Range: 4.95 - 5.05V
Max. Power Consumption:
U-Installer - 3W
U-Installer with CPE - 15W
ESD/EMP Protection: 24kV Contact / Air
Operating Temperature: 0 to 35° C (32 to 95° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC