Ligowave LW-PTMP-5-23-SU, 23dBi subscriber integrated directional antenna

Order code: LW-PTMP-5-23-SU
Quick code: #1307

Ligowave LW-PTMP-5-23-SU - High Performance 5Ghz, 23dbi, directional integrated antenna Subscriber unit, 30 dBm output power, W-Jet V wireless protocol, 1x Gbit LAN, 802.3af/at POE-in

Price exc. VAT: Price inc. VAT: For orders (total sum):
245.99£ 295.19£ >0£


Ligowave LW-PTMP-5-23-SU - Subscriber unit with an integrated directional 23 dBi antenna

Incredible performance
LigoPTMP series point to multipoint system delivers 600+ Mbps throughput via its unique and powerful RF design that supports up to 256QAM modulation and 30 dBm output power. 720 MHz dedicated CPU ensures swift data processing and high packet per second rate (PPS) which is important for real time data transmission applications.
Gigabit Ethernet port supporting 802.3af/at standard allows powering the devices with PoE switches. Weatherproof IP-67 standard rated enclosure design allows using the equipment in any climate conditions

LigoWave OS
The full featured operating system makes LigoPTMP devices ideal not only for WISPs and operators, but also for security, enterprise or industrial applications. Proprietary data transmission protocol (W-Jet V) ensures smooth performance even in noisy areas at the same time delivering high capacity, low latency and high packet per second rate. QoS (quality of service) mechanism allows prioritizing mission critical data and efficiently transmitting voice, video or other real time data over the wireless network. Essential tools like spectrum analyzer, site survey, antenna alignment and others are included.

Easy pre-configuration and maintenance - A new approach to setting up and maintaining your network

Setup Wizard - Guides the installer through the important steps of the
set-up process.

Single side configuration - Link parameters are automatically applied to subscriber
units once set on the base-station side.

Spectrum analyzer - Demonstrates the current noise floor in a waveform and
waterfall graphs.

Multiple options to pre-configure LigoPTMP devices are available. Devices can be connected with each other using wired or wireless connectivity. End-user device can also connect to the LigoBASE device using 2.4 GHz access radio or using wire to the Ethernet port of the LigoBASE device. LigoPTMP devices can be discovered using Bonjour, CDP and SSDP protocols as well.


Wireless protocol: W-Jet V
Radio mode: MIMO 2x2
Frequency range: 4.900 - 6.100 GHz (FCC: 4.940 - 4.990 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz)
Channel size: 5, 10, 20, 40, 80 MHz
Modulation schemes OFDM: (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data rates @ 80 MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
Duplexing scheme: TDD
Error correction: BCC, LDPC

LigoSU 5-23 Integrated directional dual-pol 23 dBi panel

Interface: 10/100/1000 Base-T with PoE IN (RJ45)

Dimensions without mount: LigoSU 5-23 - Length 387 mm (15.2‘’), width 379 mm (15.2‘’), height 50 mm (15.2‘’)
Mount length till pole: 130 mm (5.1‘’)
Weight including mount: LigoSU 5-23 - 3.24 kg (7.1 lb)

Power input method, voltage: PoE 802.3af, isolated 42 - 57 VDC
Power consumption (max): 10 W
PoE included

Operating temperature: -40°C (-40 F) ~ +65°C (+149 F)
Humidity: 0 ~ 90 % (non-condensing)

Software features
• Smart Auto-channel
• Robust data security
• QoS with hardware acceleration
• Spectrum analyzer
• Dual firmware image
• Client device is controlled via Base Station

Certification: FCC/IC/CE

Antenna specifications
Model name: LigoSU 5-23
Frequency range: 4.9 - 5.9 GHz
Gain: 23 dBi
Polarization: Dual linear
Cross-pol Isolation: 27 dBi
VSWR: 1.5:1
Azimuth beamwidth (H pol): 6 deg
Azimuth beamwidth (V pol): 7 deg
Elevation beamwidth: 9 deg