LigoWave DLB ECHO 5
LigoWave LigoDLB ECHO 5, Powerfull 5Ghz MIMO 2x2 802.11 a/n AP/CPE, 29dbm power, grounded 24V POE
The DLB ECHO 5 was designed for cost-effective and long distance connectivity (up to 50 km). It has a unique mounting system designed to utilize standard satellite offset dish antennas to provide increased system gain and distance. These antennas are readily obtainable in most countries, thereby reducing freight and inventory costs. The aluminum housing improves RF performance, allowing solid communications in interference laden environments as well as providing strength against the elements.
DLB ECHO 5 is a universal device that can be used in a two different ways: with a 60 cm offset dish antenna provided by LigoWave or with a 3rd party offset dish antenna.
The product is equipped with a high output power MIMO radio (up to 29 dBm) and when coupled to LigoWave’s 27 dBi dual-polarized, 60 cm, offset satellite dish antenna it is ideal for ultra long range wireless communication.
Equipped with LigoWave’s dual firmware image feature, remote software upgrades are assured even if a power failure interrupts the process. The device will restart using the prior firmware in the event of an upgrade failure.
The enclosure is made of aluminum and polycarbonate plastic with UV inhibitors to provide years of outdoor exposure in direct sunlight without cracking and survive in harsh weather conditions. Environmentally tested to meet an IP-67 rating as well as vibration, temperature, drop, salt, fog, and electrical surge standards to ensure a high level of reliability and backed by a two-year warranty. It is equipped with a grounding lug and a grounded 24-volt PoE to allow a professional installation, resistant to electrical surges.
The DLB OS is a highly functional and easy to use operating system. This powerful and flexible operating system ensures flawless operation of all DLB hardware devices and effortless setup for those deploying the networks.
• Smart polling data transmission protocol (iPoll 2)
• Dual-firmware image support
• Responsive HTML 5 based GUI
• 170 Mbps capacity
• 80,000 PPS rate
• IPv6 support
• WNMS compatible
WLAN standard IEEE 802.11 a/n, iPoll (proprietary)
Radio mode MIMO 2x2
Radio frequency band 5.150 - 5.850 GHz (FCC 5.745 - 5.825 GHz)
Transmit power Up to 29 dBm (country dependent)
Receive sensitivity Varying between -97 and -75 dBm depending on modulation
Channel size 5,10, 20, 40 MHz
Modulation schemes 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
Data rates 802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Error correction FEC, Selective ARQ
Duplexing scheme Time division duplex
Type Directional offset dish antenna or an integrated panel antenna
Gain Dish (27 dBi), panel (15 dBi)
Interface 10/100 Base-T, RJ45
Wireless operating modes Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT)
Wireless techniques Smart station polling, smart auto-channel, adaptive auto modulation,
automatic transmit power control (ATPC)
Wireless security WPA/WPA2 personal, WPA/WPA2 enterprise, WACL, user isolation
Wireless QoS 4 queues prioritization on iPoll 2
Network operating modes Bridge, router iPv4, router IPv6
Network techniques Routing with and without NAT, VLAN
WAN protocols Static IP, DHCP client, PPPoE client
Services DHCP server, SNMP server, NTP client, router advertisement daemon, ping watchdog
Management HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet
Tools Site survey, link test, antenna alignment
Dimensions (head) Length 90 mm (3.54 ‘’), width 70 mm (2.6 ‘’), height 90 mm (3.54 ‘’)
Weight 185 g (6.53 oz), offset dish: 3000 g (105.82 oz)
Power supply 12 - 24 VDC passive PoE (24 V passive PoE adapter is included in the package)
Power source 100 – 240 VAC
Power consumption (max) 4.5 W
Operating temperature -40°C (-40 F) ~ +65°C (+149 F)
Humidity 0 ~ 90 % (non-condensing)
System monitoring SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap
Additional product information: