UBIQUITI FiberPoE F-POE
UBIQUITI FiberPoE F-POE
UBIQUITI FiberPoE F-POE, Optical Data Transport for Outdoor POE Devices, EMI and ESD protection
Overcome PoE limitations with the FiberPoE™. The FiberPoE is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations.
Separate Data and Power Transport
PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.
The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber‑to‑Ethernet Converter, or a pair of FiberPoE devices to create a Fiber Bridge.
Fiber Optic Data Transport
Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
An integrated strain relief system was thoughtfully designed to fit inside the FiberPoE cover for added protection and a cleaner installation
The FiberPoE provides passive PoE power to the PoE device. Options for providing power to the FiberPoE include:
DC Power Connect a 24VDC or 50VDC power cable to the Terminal Block.
PoE (Power Only) Connect an Ethernet cable with 24V or 50V (4-pair) PoE to the DC In RJ45 port.
PoE (Power and Data) Connect an Ethernet cable with 24V or 50V (4-pair) PoE to the PoE RJ45 port.
Dimensions: 196.4 x 93.5 x 32.4 mm ( 7.73 x 3.68 x 1.28")
Weight: 288 g (10.2 oz)
Enclosure: White Polycarbonate
(1) 1 Gbps SFP Port
(1) DC Terminal Block
(1) DC RJ45 Port DC Injection
(1) 1000 Mbps Ethernet PoE Port
Typical Power Consumption: 1.5W
DC Terminal Block, 2-Wire, 24VDC or 50VDC
DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) Passthrough
PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) PoE Passthrough
PoE Output: PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or 4-Pair (24VDC or 50VDC) PoE
DC Output: Terminal Block, 2-Wire (24VDC or 50VDC)
Input: DC Voltage 16 to 57V
LED: White - Power On, Blue - Connected, Blue (Flashing) - Activity
Operating Temperature: -30 to 60° C (-22 to 140° F)
Operating Humidity: 10 to 95% Noncondensing
ESD/EMP Protection: ± 24KV Contact / Air for Ethernet
Certifications: CE, FCC, IC