LigoWave/Deliberant Wifi Products >

DELIBERANT APC 2Mi

DELIBERANT APC 2Mi

Deliberant APC 2Mi 802.11b/g/n indoor AP with 30dBm gain, Includes PoE, 2 x internal omni‐directional antenna (3dbi)

DELIBERANT APC 2Mi
Click on photo to expand
Price: Price inc VAT: For orders
(total sum):
46.62£ 55.94£ <300.00£
45.41£ 54.49£ >300.00£
44.22£ 53.06£ >1000.00£
43.01£ 51.61£ >3000.00£
41.84£ 50.21£ >7500.00£
Quantity:
Out of stock
 

Features

The APC 2Mi is a small, but robust and high performance 2.4 GHz indoor access point. This product is equipped with an extreme output power (up to 30 dBm) 802.11n MIMO radio which allows communicating effectively with an older 802.11b/g equipment together with latest standards based wireless indoor access points. The APC 2Mi is coupled with an advanced and feature-rich operating system which allows the product to operate as an access point or as a station, also act as bridge or as router.

The robust software engine running on the APC 2Mi provides a user-friendly Adobe Flex - based GUI with instant changes, includes useful installation tools (Site survey, Antenna alignment, Delayed reboot, spectrum analyzer) and also is compatible with Wireless Network Management System for one of the most advanced management tools on the market.

Specifications

Wireless:
WLAN standard IEEE 802.11 b/g/n
Radio mode MIMO 2x2
Operating modes Access point (auto WDS), Station, Station WDS, iPoll Access Point, iPoll Station
Radio frequency band 2.4 GHz
Transmit power Up to 30 dBm (country dependent)
Receive sensitivity Varying between -94 and -74 dBm depending on modulation
Channel size 20, 40 MHz
Modulation schemes 802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
» 802.11 b: DSS (CCK, DQPSK, DBPSK)
Data rates 802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
» 802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
» 802.11 b: 11, 5.5, 2, 1 Mbps
Error correction FEC, Selective ARQ, STBC
Duplexing scheme Time division duplex

Antenna:
Type 2 x external omni-directional antenna
Gain 3 dBi

Wired:
Interface 10/100 Base-T, RJ45
Built-in surge protection Yes

Networking :
Operating modes Bridge, Router
WAN Static IP, DHCP client, PPPoE client
PPoE client NAT Routing w/ or w/o NAT
Static routing Supported
DHCP Client, Server, Relay
Port forwarding Supported
VLAN Supported for management and data

Softwave:
General Ability to define/limit frequency, channel width, EIRP, modulation
Advanced wireless functionality ATPC (automatic transmit power control), DFS 3, auto-channel, auto-modulation
Operating mode Router, Bridge
Wireless operating modes AP, Station, AP WDS, Station WDS, Virtual radios (VSSID), iPoll access point, iPoll client
Wireless security WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, User isolation, UAM (web portal authentication)
Wireless QoS WMM
WAN protocols Static IP, DHCP client, PPPoE client
Network NAT, static routing, firewall, port forwarding, VLAN, traffic shaping
Services DHCP server, SNMP server, NTP client, Alerts, Remote syslog, Wireless and Ethernet statistics, bandwidth limiting
Management HTTP(S) GUI, SSH CLI, SNMP read, WNMS, troubleshooting file, reset via reset tool

Physical :
Dimensions Length 123 mm (4.8 '), width 85 mm (3.3 '), height 20 mm (0.78 ')
Weight 280 g (9.8 oz)
Power supply 12 - 48 V DC passive PoE
Power source 100 – 240 VAC via included adapter
Power consumption 7 W

Environmental :
Operating temperature -20°C (-4 F) ~ +55°C (+131 F)
Humidity 0 ~ 90 % (non-condensing)

Management :
System configuration User-friendly web GUI, Command line via SSH, centralized Wireless
Network
Management System, reset reset via reset tool
System monitoring SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap

Basket

Empty

My Account

Login
Register

We accept:

bank

paypal

mastercard

maestro

visa

american express